Donut/Through Hole Load Cell
Robust and accurate with high resistance to off-axis loads
Description
Model LTH500 is a Donut/Through Hole Load Cell built for Press, or Inline compression applications. The standard LTH500 Donut Load Cell model has a very robust construction available in 17-4 Stainless Steel, with an I.D. range of 1/8” to 1 1/4” and a 10 feet long 24 AWG 4 conductor shielded Teflon cable. You will also find options for external matched output readily available.
The Donut/Through Hole Load Cell offers high accuracy and high stiffness. It has Nonlinearity of ±0.5%, Deflection of 0.002” nominal and Operating temperature of -60° F to 200° F. The standard LTH500 Donut Load Cell can be modified or customized to meet your requirements and most capacities are in our inventory, making them available for 24 hour shipping.
Product Highlights And Features
- Fast response time
- Robust strain relief
- Compatible in load washer applications
- Offered in a variety of capacities and inner diameters
LTH500 is a low-profile donut or through-hole load cell for applications that require the load structure to pass through the sensor. It features multiple strain gauges that optimize the model’s performance and significantly reduces the influence of extraneous loads.
The LTH500 is ideal for inline applications that requires a sensor that can handle eccentric or extraneous loads and still maintain a high level of accuracy and reliability. It features an integrated 4-pin micro connector for easy cable connection and disconnection and is rated IP67 for moisture protection.
It is available in a wide range of capacities that range from 2000 to 50000lb and in a variety of inner diameter sizes from 1/8in to 1-1/2in (3.4 to 38.1mm).
Powerful performance
The proprietary design, coupled with FUTEK’s sophisticated metal foil strain gauge technology, guarantees high accuracy and repeatability. The extra strain elements inside the sensor ensures low deflection and high sensitivity as well as accurate measurements to off-axis loads, even in high extraneous load conditions. This allows you to mount the sensor in different rotational patterns, orienting the sensors to suit your system design, and still collect reliable, and accurate measurements.
Through-hole mounting
LTH500 model has a through hole with an inner hub that allows load to be attached. The outer diameter has a grey hub on the bottom base, where the unit is to be supported. The strain is measured in the diaphragm between the loading point (ID) and the mounting point (OD). Typically, a bolt or any other component connected to the load passes through the ID.
Plug in, plug out
The LTH500 is now offered with an integrated 4-pin micro connector, which allows for easy and simple cable connection and disconnection. A damaged sensor cable can be replaced without having to replace or disassemble the sensor or any other system component, which saves time, leads to higher system availability and reduces total cost of ownership. It also simplifies the installation process, reducing installation time and maximizing up time.
The 4-position micro cable connector is shown here with the keyed mating face to reduce mating errors. The image shows another model.
Robust construction
The sensors are conformally coated inside with a silicone dielectric gel, which absorbs shock and vibration, ensuring that the interconnected wires do not fatigue or fail. The coating also provides environmental protection against any ingress, improving product life and bringing the sensor up to an IP67 rating.
Eliminating moisture
With an IP67 rating, the LTH500 can withstand submersion in one meter of water for up to 30 minutes. This opens up more options for applications in outdoor usage in wet, rainy, or highly humid conditions.
Best-in-class materials
The exceptional quality of FUTEK’s LTH500 sensors makes it highly durable, robust, and reliable. Its body is made of aerospace-grade 17-4PH Stainless steel, which provides high strength, high hardness, and corrosion resistance over a wide temperature range.
Recommended applications
FUTEK’s LTH series sensors are ideally suited for applications such as press, inline compression applications, bolt fastening, toggle force clamp measurement, overload monitoring, post or leg mount, rolling mill systems, nut runner force/torque monitoring, and dual tank level controllers. Being miniature, highly robust, and reliable, these sensors were featured in NASA’s Orion deployment mechanism.
Calibration included
The LTH400 has been tested by FUTEK’s world-class calibration department and is NIST traceable. We can also reduce hidden costs and setup time by calibrating your sensor with FUTEK electronics of your choice. In addition, we offer calibration to ANSI Z540-1 and ISO 17025 standards upon request.
Made in Irvine, CA
Designed and manufactured in-house. Our multidisciplinary engineering teams, high precision machining center, state-of-the-art quality assurance systems, and R&D and manufacturing facilities are all under one roof, allowing us to continuously reinvent and refine our products and processes.
Robust and accurate with high resistance to off-axis loads
Description
Model LTH500 is a Donut/Through Hole Load Cell built for Press, or Inline compression applications. The standard LTH500 Donut Load Cell model has a very robust construction available in 17-4 Stainless Steel, with an I.D. range of 1/8” to 1 1/4” and a 10 feet long 24 AWG 4 conductor shielded Teflon cable. You will also find options for external matched output readily available.
The Donut/Through Hole Load Cell offers high accuracy and high stiffness. It has Nonlinearity of ±0.5%, Deflection of 0.002” nominal and Operating temperature of -60° F to 200° F. The standard LTH500 Donut Load Cell can be modified or customized to meet your requirements and most capacities are in our inventory, making them available for 24 hour shipping.
Product Highlights And Features
- Fast response time
- Robust strain relief
- Compatible in load washer applications
- Offered in a variety of capacities and inner diameters
LTH500 is a low-profile donut or through-hole load cell for applications that require the load structure to pass through the sensor. It features multiple strain gauges that optimize the model’s performance and significantly reduces the influence of extraneous loads.
The LTH500 is ideal for inline applications that requires a sensor that can handle eccentric or extraneous loads and still maintain a high level of accuracy and reliability. It features an integrated 4-pin micro connector for easy cable connection and disconnection and is rated IP67 for moisture protection.
It is available in a wide range of capacities that range from 2000 to 50000lb and in a variety of inner diameter sizes from 1/8in to 1-1/2in (3.4 to 38.1mm).
Powerful performance
The proprietary design, coupled with FUTEK’s sophisticated metal foil strain gauge technology, guarantees high accuracy and repeatability. The extra strain elements inside the sensor ensures low deflection and high sensitivity as well as accurate measurements to off-axis loads, even in high extraneous load conditions. This allows you to mount the sensor in different rotational patterns, orienting the sensors to suit your system design, and still collect reliable, and accurate measurements.
Through-hole mounting
LTH500 model has a through hole with an inner hub that allows load to be attached. The outer diameter has a grey hub on the bottom base, where the unit is to be supported. The strain is measured in the diaphragm between the loading point (ID) and the mounting point (OD). Typically, a bolt or any other component connected to the load passes through the ID.
Plug in, plug out
The LTH500 is now offered with an integrated 4-pin micro connector, which allows for easy and simple cable connection and disconnection. A damaged sensor cable can be replaced without having to replace or disassemble the sensor or any other system component, which saves time, leads to higher system availability and reduces total cost of ownership. It also simplifies the installation process, reducing installation time and maximizing up time.
The 4-position micro cable connector is shown here with the keyed mating face to reduce mating errors. The image shows another model.
Robust construction
The sensors are conformally coated inside with a silicone dielectric gel, which absorbs shock and vibration, ensuring that the interconnected wires do not fatigue or fail. The coating also provides environmental protection against any ingress, improving product life and bringing the sensor up to an IP67 rating.
Eliminating moisture
With an IP67 rating, the LTH500 can withstand submersion in one meter of water for up to 30 minutes. This opens up more options for applications in outdoor usage in wet, rainy, or highly humid conditions.
Best-in-class materials
The exceptional quality of FUTEK’s LTH500 sensors makes it highly durable, robust, and reliable. Its body is made of aerospace-grade 17-4PH Stainless steel, which provides high strength, high hardness, and corrosion resistance over a wide temperature range.
Recommended applications
FUTEK’s LTH series sensors are ideally suited for applications such as press, inline compression applications, bolt fastening, toggle force clamp measurement, overload monitoring, post or leg mount, rolling mill systems, nut runner force/torque monitoring, and dual tank level controllers. Being miniature, highly robust, and reliable, these sensors were featured in NASA’s Orion deployment mechanism.
Calibration included
The LTH400 has been tested by FUTEK’s world-class calibration department and is NIST traceable. We can also reduce hidden costs and setup time by calibrating your sensor with FUTEK electronics of your choice. In addition, we offer calibration to ANSI Z540-1 and ISO 17025 standards upon request.
Made in Irvine, CA
Designed and manufactured in-house. Our multidisciplinary engineering teams, high precision machining center, state-of-the-art quality assurance systems, and R&D and manufacturing facilities are all under one roof, allowing us to continuously reinvent and refine our products and processes.