Custom 6DOF Sensor
Custom 6DOF Sensor
Description
QMA154 , Ch Fx/Fy: 500 N , Ch Fz: 1000 N , Ch Mx/My/Mz: 35 N-m , Force/Torque Multi-Axis 6DOF Sensor , SPI / USB Digital Output , 285 to 400% Safe Overload Range , Up to 4800 SPS , Material - 17-4 PH S.S. , 16 Pin 0.5mm Pitch FFC
A Multi-Component Sensor (aka force-torque transducer or multi-component load cell) designed to measure in all 3 spatial directions: forces in tension and compression (±Fx, ±Fy, and ±Fz) as well as torques or moments in clockwise and counterclockwise (±Mx, ±My or ±Mz). These special force torque sensors are equipped with multiple strain gage bridges that accurately measure the forces and torques applied in one direction with little or no cross-talk interference from force or moments applied in other directions.
Benefits of FUTEK 6 DoF Force/Torque Sensor:
- Light weight
- Low profile
- High resolution embedded electronics
- Customizable for specific overload protection range
- Customizable for redundancy and fault detection
- Customizable for low power consumption
- High Zero and temperature stability
Product Highlights And Features
- Capacity:
- Ch Fx/Fy: 500 N ;
- Ch Fz: 1000 N ;
- Ch Mx/My/Mz: 35 N-m.
- Safe Overload: 285 to 400% of Capacity
- Nonlinearity: ±0.25% of R.O.
- Hysteresis: ±0.25% of R.O.
- Nonrepeatability: ±0.05% of R.O.
- Compensated Temp.: 68 to 131 °F (20 to 55 °C)
- Operating Temp,: -13 to 176 °F (-25 to 80 °C)
- Weight: (approx) 0.82 lb [372 g]
- Material: 17-4 PH S.S.
- Cable: 16 PIN 0.5mm PITCH FLAT FLEX CABLE (FFC), 5.7" [145]
- Power Consumption: 1.3 W
- Sampling Rate: 5 - 4800 SPS
Custom 6DOF Sensor
Description
QMA154 , Ch Fx/Fy: 500 N , Ch Fz: 1000 N , Ch Mx/My/Mz: 35 N-m , Force/Torque Multi-Axis 6DOF Sensor , SPI / USB Digital Output , 285 to 400% Safe Overload Range , Up to 4800 SPS , Material - 17-4 PH S.S. , 16 Pin 0.5mm Pitch FFC
A Multi-Component Sensor (aka force-torque transducer or multi-component load cell) designed to measure in all 3 spatial directions: forces in tension and compression (±Fx, ±Fy, and ±Fz) as well as torques or moments in clockwise and counterclockwise (±Mx, ±My or ±Mz). These special force torque sensors are equipped with multiple strain gage bridges that accurately measure the forces and torques applied in one direction with little or no cross-talk interference from force or moments applied in other directions.
Benefits of FUTEK 6 DoF Force/Torque Sensor:
- Light weight
- Low profile
- High resolution embedded electronics
- Customizable for specific overload protection range
- Customizable for redundancy and fault detection
- Customizable for low power consumption
- High Zero and temperature stability
Product Highlights And Features
- Capacity:
- Ch Fx/Fy: 500 N ;
- Ch Fz: 1000 N ;
- Ch Mx/My/Mz: 35 N-m.
- Safe Overload: 285 to 400% of Capacity
- Nonlinearity: ±0.25% of R.O.
- Hysteresis: ±0.25% of R.O.
- Nonrepeatability: ±0.05% of R.O.
- Compensated Temp.: 68 to 131 °F (20 to 55 °C)
- Operating Temp,: -13 to 176 °F (-25 to 80 °C)
- Weight: (approx) 0.82 lb [372 g]
- Material: 17-4 PH S.S.
- Cable: 16 PIN 0.5mm PITCH FLAT FLEX CABLE (FFC), 5.7" [145]
- Power Consumption: 1.3 W
- Sampling Rate: 5 - 4800 SPS